Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the roof lining of the Mercedes S-Class

Model: Mercedes Classe S MK 4, W220 - Years 1999-2005
Part: Convertible top

Today we will explain how to replace the roof lining of the Mercedes S-Class by yourself. We open the front doors of the car and lower the front and rear windows. We remove the roof seal and airbag covers along with the nuts. We remove the rear and front side panels by pressing on the levers. We insert a 5.5mm sheet to remove the control unit panel. We disconnect the unit connector and carefully store the piece. We remove the interior rearview mirror. We remove the safety belt bases using a flat tip screwdriver and needle-nose pliers. We loosen the edges and release the roof by pulling downward. The assembly follows the reverse process.

Posted on 13 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the AdBlue warning light on the Mercedes S-Class?
How do you reset the AdBlue warning light on the Mercedes S-Class?
Mercedes Classe S (2005-2013 / W221, MK 5) .. reset the AdBlue warning light on the Mercedes S-Class, it is necessary to refill the tank with the necessary amount of additional fluid: to refill the.. …
How to disassemble the sun visor of the Mercedes S-Class
How to disassemble the sun visor of the Mercedes S-Class
Mercedes Classe S (1999-2005 / MK 4, W220) .. and replace the sun visor of the Mercedes S-Class. First, we get on board the cabin and start levering the plastic cover of the sun visor brackets;.. …
How to Replace the Dome Light on a Mercedes S-Class
How to Replace the Dome Light on a Mercedes S-Class
Mercedes Classe S (2005-2013 / W221, MK 5) How do you replace the bulbs in the dome lights located in the roof of the Mercedes? Let's see how to disassemble it. Remove the courtesy handle with…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos