Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the internal electric rearview mirror of a Mercedes S-class W222

Model: Mercedes Classe S MK 6, W222 - Years 2013-2020
Part: Interior rearview mirror

In this video we will see how to replace the internal electric rearview mirror on a Mercedes S-class W222. First make sure that you have not inserted the key in the ignition lock. We proceed by unhooking the ceiling light simply with the help of a card (ATM type), disconnect the connectors and remove the finishing plastics that cover the camera and the rain and light sensor, now we detach the white connector of the mirror and then with a wrench we do rotate the rearview mirror anticlockwise, at this point we can remove our mirror, paying attention to the electric cables.


Posted on 15 January 2024 by ScegliAuto



How do you replace the interior rearview mirror of the Mercedes S-Class?
Mercedes Classe S (2013-2020 / MK 6, W222) In order to replace the rearview mirror of the Mercedes S-Class, you need to pry with an object so that you can detach the panel of the courtesy ligh
How to replace the turn signal in the rear view mirror of a Mercedes S-Class
Mercedes Classe S (1999-2005 / MK 4, W220) Let's see in this video how to remove and replace the direction indicator placed in the rearview mirror of a Mercedes S-Class. Very simple operation.
How to replace the battery of the Mercedes S-Class W222
Mercedes Classe S (2013-2020 / MK 6, W222) .. The battery of your Mercedes S-Class W222 is located inside the trunk, so you must first lift the rear hood of the car and then remove..

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos