Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seat of the Mercedes E-Class W212

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Seat

If you are planning to disassemble the entire rear seat of your Mercedes E-Class W212 by yourself, you must first carefully read the following guide and then follow the various steps described. First of all, turn off the car completely, then reach the rear seat and lift it up. Once you have done this, unscrew all the screws with a suitable wrench and then disconnect the electrical cables present. When you have completed these operations, you can lift the seat and pull it outwards to completely disassemble it and complete the procedure.

Posted on 15 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seat Bench on a Mercedes E-Class W212
How to Remove the Rear Seat Bench on a Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. Removing the rear seat bench of a Mercedes E-Class W212 is simple: pulling the seat cushion is easy, just slide it out. To remove the backrest, go.. …
How to Remove the Rear Seat Bench of a Mercedes E-Class
How to Remove the Rear Seat Bench of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) Before you can start, open the rear doors of your Mercedes E-Class. Begin by prying off and removing the rear cup holder cover, then detach it by uns…
Where is the OBD port of the Mercedes E-Class W212 located?
Where is the OBD port of the Mercedes E-Class W212 located?
Mercedes Classe E (2009-2016 / W212) .. The OBD port of your Mercedes E-Class W212 is located inside the cabin and in this new guide we will describe the steps you need to take.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos