|
Do it yourself
| |||
| ||||
How to replace the windshield wiper blades of a Mercedes CLA?
Model: Mercedes CLA
C118, X118
- Years 2019-2025
To replace the windshield wiper blades of a Mercedes CLA, start by putting the wipers in service position. Turn on the instrument panel without starting the engine and then immediately turn it off, then move the wiper lever upwards within a few seconds. This will cause the wiper arms to stop in the vertical position, making access easier. Once the wipers are in position, gently lift the wiper arm and locate the attachment point of the blade. Press the release mechanism or clip and slide the old blade off the arm. Take the new blade, making sure it is compatible with your car model, and insert it into the arm until you hear a click confirming the correct attachment. Repeat the procedure for the other wiper blade, if necessary. Return the wiper arms to the initial position by gently lowering them onto the windshield. Finally, turn on the instrument panel to check for proper operation.
Posted on 18 July 2025 by ScegliAuto
Video tutorial
Related tutorials
Mercedes CLA
(2013-2019 /
C117, X117)
To replace the windshield wiper blades on a Mercedes CLA, lift the arm so that the blade to be replaced does not touch the windshield. Next, disconne…
Mercedes CLA
(2013-2019 /
C117, X117)
When you notice that the windshield is not completely clean but has streaks while using the wiper blades, it means it's time to replace the wipers. I…
Mercedes CLA
(2013-2019 /
C117, X117)
To replace the windshield wiper motor on a Mercedes CLA, loosen the screws that secure the wiper arms to their housing. Once the wiper arms and linka…
Other guides you may be interested in
|
How to Replace the Cabin Filter on the Opel Grandland X
If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.097
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
