Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : Disassembly and replacement of the car radio

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Car stereo
Operation: Disassembly and replacement of the car radio

In order to disassemble the original car radio, it is necessary to have the special keys to insert in the two slots placed in correspondence with the lower edges and then release the locking devices. Once the keys have been inserted into the slots, it is possible to remove the car radio and disconnect the sockets connected to it. To be able to extract the keys it is necessary to press the side fixing tabs of the radio and remove the keys themselves. To proceed with reassembly, first connect the sockets, check the integrity of the fuse and insert the radio in its seat, pressing until the safety catches re-engage.


Posted on 29 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe A 2004-2012 - Why does the Mercedes A-Class car radio no longer turn on? Read Answer
    • Classe A 1997-2004 - Why does the display of the Mercedes A-Class w168 not work? Read Answer
    • Classe A 2018-2024 - Why does the car radio of the Mercedes A-Class not work? Read Answer
    • Classe A 1997-2004 - Where is the Mercedes A-Class car radio fuse located? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos