Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Interior Rearview Mirror and Cabin Light Fixture

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Rearview mirror

See other generations:
Video tutorial

First, detach the rain sensor cover, which is located around the rearview mirror, and then carefully pull the mirror itself to disengage it from its mount. At this point, using a plastic spatula, detach the light fixture along the edges and remove it from its housing, being careful not to pull it too far to avoid damaging the wiring of the connected connectors, which will need to be disconnected to completely remove it (also pay attention to the cable securing clips present).


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Replacing the Interior Rearview Mirror of the Mercedes E-Class
Replacing the Interior Rearview Mirror of the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) Here are the main instructions to remove and replace the interior rearview mirror of the Mercedes E-Class. First, get inside the vehicle and pull dow…
How to Remove the Interior Rearview Mirror
Mercedes Classe E (1995-2002 / W210) Removing the interior rearview mirror from the Mercedes E-Class is relatively simple. Just grab it with both hands and pull down, but do so carefully…
Disassembly of the external rearview mirror of the Mercedes E-Class
Disassembly of the external rearview mirror of the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) Today we will see the instructions for disassembling and replacing the external rearview mirror of the Mercedes E-Class. First of all, let's move to …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos