Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Dashboard Panel of a Mercedes SLK

Model: Mercedes Slk MK 2, R171 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Dashboard

See other generations:
Video tutorial

Here’s how to remove the centre dashboard panel of a Mercedes SLK. Position the gear knob vertically, then use a plastic lever to pry off the trim (the gaiter with the plastic) located at the bottom of the centre tunnel. After removing the gaiter, unscrew the screws inside the central mask with a screwdriver.

Once this is done, pull away the plastic with the radio (disconnect any power cables). Finally, insert the new piece into the plastic covering of the tunnel and reassemble all components.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

Removing the Centre Console of the Mercedes SLK
Removing the Centre Console of the Mercedes SLK
Mercedes Slk (1997-2004 / MK 1, R170) This guide provides the main instructions useful for removing and replacing the centre console of the Mercedes SLK. First, get inside the vehicle and…
How to disassemble the tunnel and central console of the Mercedes SLK
How to disassemble the tunnel and central console of the Mercedes SLK
Mercedes Slk (2004-2011 / MK 2, R171) The following steps will show us how to disassemble the tunnel and central console of the Mercedes SLK. First, we get into the car and start by remov…
How to Remove the Radio from a Mercedes SLK?
How to Remove the Radio from a Mercedes SLK?
Mercedes Slk (2011-2016 / R172, MK 3) In this tutorial, see how to replace the radio in the Mercedes SLK, a very simple operation. First, ensure that the key is not inserted. Then, using …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos