Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on a Mercedes C-Class.

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

A quick tutorial video that illustrates the steps to reset the service light on a 2012 Mercedes C-Class vehicle. As shown in the video, to reset the light, we need to turn on the instrument panel and simultaneously press the OK button and the call button to access the service screen.

Using the arrow buttons, we select the "full service" option by pressing the OK button. Next, we select the "assist plus" option and then the "reset" option.

By doing this, we will have set the kilometers for the next service, which can be viewed through the service menu.


Posted on 25 November 2025 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) The steps to reset the service light for the car maintenance of Mercedes vehicles are simple and quick to perform independently. To carry out this op…
Mercedes Classe C (2007-2013 / W204) .. maintenance oil change on the Mercedes-Benz C-Class. First, get in the vehicle and turn on the ignition; then access the onboard computer menu using.. …
Mercedes Classe C (2014-2021 / W205) .. of the engine oil change on a Mercedes C-Class. First, get in the vehicle and turn on the ignition; then press both buttons on the steering wheel.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos