Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service on the Mercedes Classe C?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, we will see how to reset the service in the Mercedes C-Class, a very simple and quick operation that should be done only after completing all scheduled maintenance tasks. Let's start by going inside the cabin, then insert the key and turn on the instrument panel.

Next, we navigate to the screen displaying the odometer, press and hold both the call button and the "OK" button, and in the menu that appears, select "ASSYST PLUS." At this point, all that’s left is to enter "Full Service" and perform the reset by selecting the "Conf. Full Serv." option.


Posted on 25 November 2025 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) To reset the service light on a Mercedes-Benz C-Class, follow these steps: Turn on the vehicle and ensure all doors are closed. Access the main menu …
Mercedes Classe C (2007-2013 / W204) Briefly, we will discover the instructions that will allow you to reset the maintenance service light on the Mercedes C-Class. First, get inside the …
Mercedes Classe C (2014-2021 / W205) In this guide, you will find instructions to reset the service light on the Mercedes-Benz C-Class in simple steps. First, get in the vehicle and turn…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos