Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Remove the glow plugs from your Mercedes E-Class

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Glow plugs
Operation: Remove the glow plugs from your Mercedes E-Class

Do you want to remove the glow plugs of your Mercedes E-Class and don't know how to do it? Let's see how to proceed with the disassembly. We pull the lever to open the engine compartment located at the bottom left of the dashboard and lift the front hood, we secure the same. We remove the motor cover panel with the inscription CDI and remove the coil (let's rotate it in a twist way) until it comes out of the head. We unscrew the glow plugs with a socket wrench; we take the new glow plug and insert it into the cylinder head with the socket wrench. Finally we reassemble the plastic head cover panel.


Posted on 9 November 2023 by ScegliAuto



You want to remove the glow plugs on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. want to remove the glow plugs on the Mercedes E-Class and don't know how to do it? Let's see in this detailed video how to proceed with disassembly...
Mercedes E-Class CDI W210 glow plug replacement
Mercedes Classe E (2002-2009 / W211) .. replace the engine glow plugs of a Mercedes E-Class CDI W210. First of all we open the bonnet and we go to remove the plastic protection of the engine,..
How to replace the glow plugs on a Mercedes Benz E-Class (W210) diesel.
Mercedes Classe E (1995-2002 / W210) .. to replace the glow plugs on a Mercedes Benz E-Class (W 210) diesel, following a few steps: the first thing to do is to get in the car, turn off the..

Other guides that may interest you

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos