Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Glow Plugs on Mercedes Benz E-Class (W 210) Diesel

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Glow plugs

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the glow plugs on a Mercedes Benz E-Class (W 210) diesel by following these steps: First, get inside the vehicle, turn off the engine, and engage the parking brake. Pull the lever to lift the hood and secure it with the prop rod. Use WD-40 spray to treat the glow plugs, then start the engine for a few minutes.

Turn off the engine and use an 11 mm socket wrench to remove the fuel line fastening element. Disconnect the glow plug connectors and then use an air compressor to clean the glow plug seats.

Use a socket wrench to unscrew the glow plugs from their seats, then remove the old glow plugs. Install the new glow plugs in their mounting seats.

Apply a treatment product to the glow plug connectors and reconnect the fuel return line.


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to Replace Glow Plugs in the Mercedes E-Class?
How to Replace Glow Plugs in the Mercedes E-Class?
Mercedes Classe E (1995-2002 / W210) In this tutorial, see how to replace the glow plugs in the Mercedes E-Class, a relatively simple operation that requires attention. First, wait for t…
Replace Glow Plugs on Mercedes E-Class
Replace Glow Plugs on Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) How to replace the glow plugs on a Mercedes E-Class? Let's see the replacement process. Disconnect the battery terminals, remove the soundproofing co…
How to Remove the Glow Plugs on a Mercedes E-Class
How to Remove the Glow Plugs on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Do you want to remove the glow plugs on a Mercedes E-Class and don't know how? Let's see in this detailed video how to proceed with the removal. Pull…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos