Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe E
  6. : Replace the Mercedes E-class glow plugs

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Spark plugs
Operation: Replace the Mercedes E-class glow plugs

How to replace the glow plugs of the Mercedes E-Class? Let's see the replacement. We disconnect the battery terminals, remove the soundproofing panel covering the engine, unscrew the pins that tighten the coils on the engine head; immediately afterwards we unscrew the candles with a socket wrench, take them out of the head. We take the new spark plugs and accompany them with the socket wrench extension in the engine head, tighten them and connect the power coils to each spark plug with the new ones. We test the correct functioning of the spark plugs with the ignition of the engine.


Posted on 30 November 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos