Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Remove Mercedes E-Class glow plugs

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Glow plugs

Replacing damaged glow plugs on a Mercedes E-Class? Let's see how to do it. We open the bonnet and lift it, put it in safety, disconnect the battery terminals. Disassemble the soundproofing panel covering the motor if present, remove the tightening screws of the coils on the head of the motor with a screwdriver; we detach the coils. Immediately afterwards we unscrew the candles with a socket wrench, take them out of the head. We take the new spark plugs and accompany them with the socket wrench extension in the engine head, tighten them and connect the power coils to each spark plug. We mount the coils w we test the motor.


Posted on 3 December 2023 by ScegliAuto



You want to remove the glow plugs on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Do you want to remove the glow plugs on the Mercedes E-Class and don't know how to do it? Let's see in this detailed video how to proceed with disass
Mercedes E-Class CDI W210 glow plug replacement
Mercedes Classe E (2002-2009 / W211) In today's video we will see how to remove and replace the engine glow plugs of a Mercedes E-Class CDI W210. First of all we open the bonnet and we g
Remove the glow plugs from your Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Do you want to remove the glow plugs of your Mercedes E-Class and don't know how to do it? Let's see how to proceed with the disassembly. We pull the

Other guides that may interest you

How to set the time of the new Vespa 2023

In our new mini guide dedicated to your new Vespa 2023, we'll find out how to manually change the time displayed on the central console display. So first place your Vespa on the stand. Then insert the key and start the instrument cluster. At this point locate the "Mode" button on the right knob and hold it down for a few seconds. Release it as soon as the time on the panel starts flashing and press it several times to change both the hours and minutes digits. At the end, turn off the ignition and you are done.

Watch the video!


by ScegliAuto

More videos