Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to remove the passenger compartment ventilation fan on Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Interior blower
Operation: How to remove the passenger compartment ventilation fan on Mercedes C-Class

How to remove the passenger compartment ventilation fan on Mercedes C-Class. Remove the cloth covering under the glove compartment with a plastic lever. The passenger compartment ventilation fan is located exactly under the dashboard; unscrew the tightening screws located above the fan cover with a screwdriver. Once this has been done, let's pull off the cap with the fan after disconnecting the power cables. We carry out the necessary cleaning of the fan (we disassemble the fan and its parts). We mount (replace) the previously disassembled fan and all its components under the glove box. We check the voltage regulator and its correct operation.


Posted on 11 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2000-2007 - Why is the cooling fan of the Mercedes C-Class W203 not working? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos