Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Power Steering Pump on the Mercedes E-Class 350

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Pump

See other generations:
Video tutorial

In this brief guide, you will find instructions for the disassembly and replacement of the power steering pump on the Mercedes E-Class 350. First, disconnect the battery; then open the hood and start removing the power steering fluid reservoir by disconnecting the hose.

Below, you will find the power steering pump.

Unscrew the mounting bolts to remove it, as shown in the video. At this point, replace the pump with the new original one, reassemble the reservoir, and finally top off the fluid.


Posted on 11 February 2026 by ScegliAuto


Related tutorials

Replacing Power Steering Pump on Mercedes E-Class 350 V6
Replacing Power Steering Pump on Mercedes E-Class 350 V6
Mercedes Classe E (2009-2016 / W212) .. replace the power steering pump on a Mercedes E-Class 350 V6. First, open and lift the hood. Remove the drive belt by loosening the tensioner with a.. …
Replacing the Power Steering Pump on the Mercedes E-Class 270
Replacing the Power Steering Pump on the Mercedes E-Class 270
Mercedes Classe E (2002-2009 / W211) Today, you will see the instructions that will allow you to remove and replace the power steering pump on the Mercedes E-Class 270. First, open the h…
How to Replace the Power Steering Pump on the Mercedes E-Class W211
How to Replace the Power Steering Pump on the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) In today's tutorial video, you will learn how to remove and replace the power steering pump on the Mercedes Benz E-Class W211, following the instruct…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos