Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Mercedes E-Class?

Model: Mercedes Classe E W213 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

You can completely turn off the Service light indicated on the instrument cluster of the Mercedes E-Class by pressing and holding the HOME button located on the left side of the steering wheel. This will give you access to the menu, and you can navigate using the arrow buttons on the left side until you select the settings option.

Then, select "ASSYST PLUS" and turn the key to position two. This will allow you to select the "Full service" option and then "Confirm reset." Doing this will turn off the light and also turn off the display.


Posted on 13 February 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Mercedes E-Class?
How to Reset the "Service" Light on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. reset the maintenance light on your Mercedes E-Class. First, start the car and ensure that the "Service" indicator is visible on the display. Using.. …
How to Reset the Service Light on the Mercedes E-Class
How to Reset the Service Light on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. to reset the service light for a 2004 Mercedes E-Class. The light should only be reset after completing the service procedure. To perform the reset, press.. …
Reset the Service Light on the Mercedes E-Class
Reset the Service Light on the Mercedes E-Class
Mercedes Classe E (2016-2023 / W213) .. routine maintenance oil change on the Mercedes E-Class. First, get inside the vehicle and turn on the ignition; then access the onboard computer menu.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos