Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Service Light on the Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

Today, let's go through the procedure to reset the service light on the Mercedes E-Class. First, get inside the vehicle and turn on the ignition; then use the turn signal buttons on the steering wheel until you reach the service option on the instrument cluster display, as shown in the video.

At this point, press and hold the left button on the cluster for about six seconds to enter the service menu, following the guided procedure to confirm and execute the maintenance key reset!


Posted on 24 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Mercedes-Benz E-Class
How to Reset the Service Light on the Mercedes-Benz E-Class
Mercedes Classe E (2016-2023 / W213) .. for routine maintenance on the Mercedes-Benz E-Class. First, get in the vehicle and turn on the ignition; then navigate to the onboard computer settings.. …
How to Reset the Service Light on the Mercedes E-Class
How to Reset the Service Light on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. to reset the service light for a 2004 Mercedes E-Class. The light should only be reset after completing the service procedure. To perform the reset, press.. …
Resetting the engine oil change indicator (service) of the Mercedes E-Class.
Resetting the engine oil change indicator (service) of the Mercedes E-Class.
Mercedes Classe E (2002-2009 / W211) .. the service maintenance light of the Mercedes E-Class. First of all, we get into the cockpit and start the instrument panel; then we use the steering.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos