Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Driver's Side Dashboard

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Dashboard

See other generations:
This video is currently unavailable

This short video shows how to remove some parts of the driver's side dashboard of a Mercedes W210. After loosening the screws that hold the panel under the steering wheel, use pliers to disconnect the hood release handle from the cable. Now, using a plastic trim tool, remove the panel and disconnect the connector attached to it. Also, pull out the brightness adjustment by pushing it outward.

Now, unscrew the two screws that hold the vent trim and turn signal switch and remove it. After loosening the side screw of the dashboard, pull out the entire turn signal switch assembly; as the last step, disconnect its connector.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Fuse Locations on the Mercedes E-Class W212
Fuse Locations on the Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) The first fuse box of the Mercedes E-Class is located in the trunk, on the right side (looking at the vehicle from the rear), just behind the lid, in…
How to replace the ventilation nozzle on the driver's side in the Mercedes E-Class?
How to replace the ventilation nozzle on the driver's side in the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) In this tutorial we can see how to replace the ventilation nozzle on the driver's side in the Mercedes E-Class, an extremely simple and fast operatio…
Internal Fuse Box Diagram for Mercedes E-Class
Internal Fuse Box Diagram for Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) This vehicle has three fuse boxes. The first is located in the cabin under the dashboard on the left side, specifically on the side of the dashboard …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos