Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Dashboard

Mercedes Classe E - Dashboard

Mercedes Classe E (1995-2002 / W210)
Disassembly of the dashboard of the Mercedes E-Class
In this video tutorial, we will see how to disassemble and replace the entire dashboard of the Mercedes E-Class, following the instructions below. First of …read all…
Posted on 12 May 2024 by ScegliAuto
Mercedes Classe E (2002-2009 / W211)
How do you disassemble the dashboard of the Mercedes E-Class?
In order to disassemble the dashboard on the Mercedes E-Class, you need to detach the trim that runs along the entire dashboard. Once this is detached, you can …read all…
Posted on 13 December 2023 by ScegliAuto
Mercedes Classe E (1995-2002 / W210)
How to disassemble the central console of the Mercedes E-Class
Below we will see step-by-step instructions that will allow us to disassemble and replace the central console of the dashboard of the Mercedes E-Class. First …read all…
Posted on 25 September 2023 by ScegliAuto
Mercedes Classe E (2016-2023 / W213)
Disassembly of the dashboard of the Mercedes E-Class.
Today's guide will show us the main instructions on how to disassemble and replace the entire dashboard to access the heating radiator of the Mercedes E-Class. …read all…
Posted on 22 June 2023 by ScegliAuto
Mercedes Classe E (1976-1985 / W123)
Disassembly of the dashboard of the Mercedes E-Class.
Today's guide will show us step-by-step instructions on how to disassemble and replace the entire dashboard of the Mercedes E-Class. First, we get on board the …read all…
Posted on 10 May 2023 by ScegliAuto
Mercedes Classe E (2002-2009 / W211)
Dashboard disassembly on Mercedes E-Class
To begin with, you have to disassemble the speedometer frame and to do this you simply have to pull it by hand with a little force. At this point you have …read all…
Posted on 30 January 2024 by ScegliAuto
Mercedes Classe E (2009-2016 / W212)
How we extract the navigator of a Mercedes from the dashboard
How to disassemble the original navigator / stereo of our Mercedes? Let's see in this video how to proceed for the right disassembly. With a thin screwdriver, …read all…
Posted on 29 September 2023 by ScegliAuto
Mercedes Classe E (1995-2002 / W210)
How to remove the dashboard on the driver's side
This short video shows how to remove some parts of the dashboard on the driver's side of a Mercedes W210. After loosening the screws that support the panel …read all…
Posted on 1 July 2023 by ScegliAuto
Mercedes Classe E (2002-2009 / W211)
Disassembly of dashboard gear knob and ashtray
Remove the central tunnel by gently lifting it upwards and disconnect the cigarette lighter connector. Place the gear lever in the central position and gently …read all…
Posted on 26 June 2023 by ScegliAuto
Mercedes Classe E (1995-2002 / W210)
How to remove the instrument panel on the dashboard
Disassembling the instrumentation from the dashboard is an apparently simple operation but must be carried out with great care in order not to cause damage. …read all…
Posted on 23 June 2023 by ScegliAuto
Mercedes Classe E (1995-2002 / W210)
How to remove the dashboard in the upper and lower part
Removing the E-Class dashboard, both in the lower part and in the upper part, does not present particular difficulties as long as you have an idea of where the …read all…
Posted on 21 June 2023 by ScegliAuto
Mercedes Classe E (1995-2002 / W210)
How to remove the dashboard, drawer and air vents
This tutorial shows how to remove the dashboard, the front drawer and the air vents on the passenger side. The operation is not difficult, but particularly …read all…
Posted on 21 June 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (3) Loudspeaker (10) Shock absorbers (7) Antenna (1) Air conditioning (2) Car stereo (16) Anti roll bar (1) Battery (31) Air Vents (3) Arm (3) Grille (1) Gearbox (8) Spark plugs (3) Glow plugs (6) Soft top (1) Bodywork (11) Glove box (1) Control unit (8) Key (28) Locking the trunk (1) Timing belt (9) V-belt (1) Air conditioning (6) Air conditioning controls (7) -board computer (25) Checks and maintenance (157) Dashboard (12) Bearing (1) Brake discs (1) Rear bench seat (1) Electric fan (1) Side indicator light (2) Headlight (14) Tail light (4) Fog lights (1) Air filter (7) Cabin air filter (14) Petrol filter (2) Diesel filter (2) Oil filter (4) Hand brake (1) Grille (1) Injectors (2) Window lift switch (3) Accessory Kit (3) Xenon headlight kit (1) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (18) Rear light bulb (1) Interior lights ceiling light bulb (9) Antifreeze liquid (1) Dashboard light (4) License plate light (2) Rear window (1) Handle (4) Muffler (1) Engine (8) Window motor (4) Starter motor (4) Gear oil (5) Brake oil (1) Engine oil (5) Door panel (25) Windshield (1) Front bumper (4) Rear bumper (1) Tires (2) Gear Shift Knob (5) Pump (7) Fuel pump (8) Door (1) Push button (2) Window lift button (3) Instrument cluster (24) Radiator (4) Wheel (1) Fuse box (48) Seat (14) Crankshaft RPM sensor (5) Coolant temperature sensor (3) Parking sensors (3) Lock (5) Lambda sensor (1) Suspensions (1) Outside rearview mirror (30) Interior rearview mirror (6) Manufacturer's coat of arms (1) Engine mount (3) Windscreen wipers (4) Thermostat (1) Transmission (3) Central tunnel (3) Turbine (1) Valve (1) EGR valve (8) Interior blower (4) Side window (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos