Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Dashboard of the Mercedes E-Class

Model: Mercedes Classe E W123 - Years 1976-1985
Part: Dashboard

This guide will show you step-by-step instructions on how to remove and replace the entire dashboard of the Mercedes E-Class. First, get inside the vehicle and start by removing the steering wheel by loosening the center bolt; then, remove the screws securing the instrument cluster and disconnect the connector at the back, as shown in the video. At this point, remove the entire center console by taking out all the buttons and disconnecting the various electrical harnesses; finally, remove the passenger side glove compartment, carefully taking the dashboard out of the cabin!

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Glove Compartment of a Mercedes E-Class
Removing the Glove Compartment of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. replacing the glove compartment of a Mercedes E-Class. First, get inside the cabin and start by removing the central plastic cover of the dashboard by.. …
How to disassemble the instrument panel of the Mercedes E-Class dashboard
How to disassemble the instrument panel of the Mercedes E-Class dashboard
Mercedes Classe E (2016-2023 / W213) .. replace the instrument panel of the Mercedes E-Class dashboard. First of all, we get on board the cabin and start by removing the plastic cover located.. …
How to Remove the Dashboard in the Mercedes E-Class?
How to Remove the Dashboard in the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. To remove the dashboard in the Mercedes E-Class, you need to detach the trim that runs along the entire dashboard. Once this is removed, you can.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos