Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Control unit

Mercedes Classe E - Control unit

Mercedes Classe E (2002-2009 / W211)
Replacement of the control unit of the Mercedes E-Class.
In this video tutorial, we will see how to disassemble and replace the control unit of the Mercedes E-Class. First, we open the car's engine hood and start by …read all…
Posted on 14 January 2024 by ScegliAuto
Mercedes Classe E (2002-2009 / W211)
How do you reset the control unit of the Mercedes E-Class?
In order to reset the control unit of the Mercedes E-Class, you need to completely remove the piece from its housing so that it can be connected to the …read all…
Posted on 15 October 2023 by ScegliAuto
Mercedes Classe E (2002-2009 / W211)
How to reset the ecu of the Mercedes E-Class W211
To reset the Mercedes E-Class W211 ecu, insert the key into the ignition; we turn the key to the "on" position (the position immediately before starting the …read all…
Posted on 11 April 2023 by ScegliAuto
Mercedes Classe E (1995-2002 / W210)
How do you remove the Mercedes E-Class ECU?
In order to replace the Mercedes E-Class ECU, the hood must be opened to gain access to the engine compartment. The control unit is located in the upper part …read all…
Posted on 8 March 2024 by ScegliAuto
Mercedes Classe E (1995-2002 / W210)
Removal of ECU Mercedes W210
In this video we will see the main steps to be able to disassemble the ECU of a Mercedes-Benz E-Class W210. First of all, let's open the bonnet of our car: …read all…
Posted on 28 December 2023 by ScegliAuto
Mercedes Classe E (2002-2009 / W211)
ABS control unit disassembly instructions
If the ABS warning light comes on on the instrument panel display and a check of the fault memory reveals that there is a problem with the relevant control …read all…
Posted on 9 September 2023 by ScegliAuto
Mercedes Classe E (2002-2009 / W211)
Car ECU replacement
Among the components of a car's engine, the control unit is the one that can fail most frequently. In this case it will be advisable to replace it. The …read all…
Posted on 2 September 2023 by ScegliAuto
Mercedes Classe E (2002-2009 / W211)
Central locking control unit replacement
In order to replace the central locking control unit, first remove the door panel: start by removing the plastic insert that covers the lock and then the one …read all…
Posted on 31 August 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (3) Loudspeaker (10) Shock absorbers (7) Antenna (1) Air conditioning (2) Car stereo (16) Anti roll bar (1) Battery (31) Air Vents (3) Arm (3) Grille (1) Gearbox (8) Spark plugs (3) Glow plugs (6) Soft top (1) Bodywork (11) Glove box (1) Control unit (8) Key (28) Locking the trunk (1) Timing belt (9) V-belt (1) Air conditioning (6) Air conditioning controls (7) -board computer (25) Checks and maintenance (157) Dashboard (12) Bearing (1) Brake discs (1) Rear bench seat (1) Electric fan (1) Side indicator light (2) Headlight (14) Tail light (4) Fog lights (1) Air filter (7) Cabin air filter (14) Petrol filter (2) Diesel filter (2) Oil filter (4) Hand brake (1) Grille (1) Injectors (2) Window lift switch (3) Accessory Kit (3) Xenon headlight kit (1) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (18) Rear light bulb (1) Interior lights ceiling light bulb (9) Antifreeze liquid (1) Dashboard light (4) License plate light (2) Rear window (1) Handle (4) Muffler (1) Engine (8) Window motor (4) Starter motor (4) Gear oil (5) Brake oil (1) Engine oil (5) Door panel (25) Windshield (1) Front bumper (4) Rear bumper (1) Tires (2) Gear Shift Knob (5) Pump (7) Fuel pump (8) Door (1) Push button (2) Window lift button (3) Instrument cluster (24) Radiator (4) Wheel (1) Fuse box (48) Seat (14) Crankshaft RPM sensor (5) Coolant temperature sensor (3) Parking sensors (3) Lock (5) Lambda sensor (1) Suspensions (1) Outside rearview mirror (30) Interior rearview mirror (6) Manufacturer's coat of arms (1) Engine mount (3) Windscreen wipers (4) Thermostat (1) Transmission (3) Central tunnel (3) Turbine (1) Valve (1) EGR valve (8) Interior blower (4) Side window (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos