Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

ABS Module Disassembly Instructions

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Control unit

See other generations:
Video tutorial

If the ABS warning light illuminates on the instrument cluster and a fault memory check reveals an issue with the ABS module, you will need to proceed with disassembly. Once you open the hood, the module is located on the passenger side, just behind the coolant reservoir.

To remove it, you must move the reservoir, disconnect the retaining clip from the connector attached to the module, remove the mounting nut for the support bracket, and then unscrew the screws around the perimeter of the module to extract it from its housing.

Inside, you will find the solenoids that actuate the pump pistons.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Check Traction Control Fuse Integrity
Check Traction Control Fuse Integrity
Mercedes Classe E (2002-2009 / W211) If the traction control warning light illuminates on the dashboard and the vehicle tends to enter recovery mode, there may be a fault with the ABS mo…
How to Reset the ECU of the Mercedes E 320 CDI
How to Reset the ECU of the Mercedes E 320 CDI
Mercedes Classe E (2002-2009 / W211) In this guide, you will find the instructions needed to reset the engine control unit (ECU) of the Mercedes E-Class. First, open the hood of the vehi…
Replacing the Car ECU
Replacing the Car ECU
Mercedes Classe E (2002-2009 / W211) Among the components of a car engine, the ECU (engine control unit) is the one that is most likely to fail. In this case, it is advisable to replace …

    Frequently Asked Questions

    • Classe E 2016-2023 - Where is the ECU of the Mercedes E-Class W213 located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos