Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Window lift switch

Mercedes Classe E - Window lift switch

Mercedes Classe E (2002-2009 / W211)
Disassembly and replacement of the window switch of the Mercedes E-Class
Below we will see the steps that will allow us to disassemble and replace the window switch of the Mercedes E-Class. First, we open the door and start …read all…
Posted on 13 May 2024 by ScegliAuto
Mercedes Classe E (2016-2023 / W213)
How to replace the window lifter console in the Mercedes E-Class?
In this tutorial we can see how to replace the window lifter console in the Mercedes E-Class W213, a very simple and fast operation. To do this, we will only …read all…
Posted on 11 April 2023 by ScegliAuto
Mercedes Classe E (2002-2009 / W211)
Intercooler replacement on Mercedes E
Do we want to replace the intercooler on Mercedes E? We disassemble the bumper to access the intercooler and disassemble it. We raise the engine hood by …read all…
Posted on 21 December 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (3) Loudspeaker (10) Shock absorbers (7) Antenna (1) Air conditioning (2) Car stereo (16) Anti roll bar (1) Battery (31) Air Vents (3) Arm (3) Grille (1) Gearbox (8) Spark plugs (3) Glow plugs (6) Soft top (1) Bodywork (11) Glove box (1) Control unit (8) Key (28) Locking the trunk (1) Timing belt (9) V-belt (1) Air conditioning (6) Air conditioning controls (7) -board computer (25) Checks and maintenance (157) Dashboard (12) Bearing (1) Brake discs (1) Rear bench seat (1) Electric fan (1) Side indicator light (2) Headlight (14) Tail light (4) Fog lights (1) Air filter (7) Cabin air filter (14) Petrol filter (2) Diesel filter (2) Oil filter (4) Hand brake (1) Grille (1) Injectors (2) Window lift switch (3) Accessory Kit (3) Xenon headlight kit (1) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (18) Rear light bulb (1) Interior lights ceiling light bulb (9) Antifreeze liquid (1) Dashboard light (4) License plate light (2) Rear window (1) Handle (4) Muffler (1) Engine (8) Window motor (4) Starter motor (4) Gear oil (5) Brake oil (1) Engine oil (5) Door panel (25) Windshield (1) Front bumper (4) Rear bumper (1) Tires (2) Gear Shift Knob (5) Pump (7) Fuel pump (8) Door (1) Push button (2) Window lift button (3) Instrument cluster (24) Radiator (4) Wheel (1) Fuse box (48) Seat (14) Crankshaft RPM sensor (5) Coolant temperature sensor (3) Parking sensors (3) Lock (5) Lambda sensor (1) Suspensions (1) Outside rearview mirror (30) Interior rearview mirror (6) Manufacturer's coat of arms (1) Engine mount (3) Windscreen wipers (4) Thermostat (1) Transmission (3) Central tunnel (3) Turbine (1) Valve (1) EGR valve (8) Interior blower (4) Side window (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos