Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Central Locking Control Module

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Control unit

See other generations:
Video tutorial

To replace the central locking control module, first remove the door panel: start by removing the plastic insert covering the lock, then the one at the front of the panel near the location of the outside rearview mirror, unscrewing the screws underneath; perform the same operation under the armrest support and also remove the tweeter grille, then release the clips along the edges of the panel by unscrewing the fastener to complete the disassembly.

Disconnect the lock cable and various connectors; once the panel is removed, you can access the control module by disconnecting all the connectors and releasing the retaining tabs.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacing the Car ECU
Replacing the Car ECU
Mercedes Classe E (2002-2009 / W211) Among the components of a car engine, the ECU (engine control unit) is the one that is most likely to fail. In this case, it is advisable to replace …
Replacing the Control Unit on a Mercedes E-Class
Replacing the Control Unit on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) In this video tutorial, you will learn how to remove and replace the control unit on the Mercedes E-Class. First, open the hood of the vehicle and di…
How to Reset the ECU of the Mercedes E 320 CDI
How to Reset the ECU of the Mercedes E 320 CDI
Mercedes Classe E (2002-2009 / W211) In this guide, you will find the instructions needed to reset the engine control unit (ECU) of the Mercedes E-Class. First, open the hood of the vehi…

Other guides you may be interested in

    Frequently Asked Questions

    • Classe E 2016-2023 - Where is the ECU of the Mercedes E-Class W213 located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos