Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard from the Upper and Lower Parts

Model: Mercedes Classe E W210 - Years 1995-2002
Part: Dashboard

Removing the dashboard of the E-Class, both the lower and upper parts, is not particularly difficult as long as you know where the screws are located and pay attention to the few electrical connectors you will encounter during the process. The lower panel requires the removal of 2 screws, while to extract the upper part, simply pull it off, as there are 6 clips holding it in place. To remove the air vent grille, unscrew the visible screw above it. You may need to remove the dashboard to replace the LED lighting.

Updated on 2 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset Power Windows on Mercedes E-Class W210
How to Reset Power Windows on Mercedes E-Class W210
Mercedes Classe E (1995-2002 / W210) In this video, learn how to reset the memory for both the upper and lower stops for the power windows on the Mercedes E-Class W210. This procedure mu…
How to Reset the Service Light on the Mercedes E-Class W211
How to Reset the Service Light on the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) To reset the service light on the Mercedes E-Class W211, start by turning the key clockwise to the second position and note the message on the servic…
Where is the Auxiliary Battery Located in the Mercedes E-Class?
Where is the Auxiliary Battery Located in the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) In this video, you can see where the auxiliary battery is located in the Mercedes E-Class and how to proceed if you need to replace it, a very simple…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos