Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Rearview Mirror of the Mercedes C-Class

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Side mirror

See other generations:
Video tutorial

To remove the external rearview mirror of the Mercedes C-Class model W203, first remove the glass. Tilt the mirror forward and gently press down on the bracket to slide the mirror inward and remove it. Disconnect the connector using a flathead screwdriver.

To remove the mirror cap, release the clip using a long slotted screwdriver. Using a star screwdriver, unscrew all the screws that secure the mirror bracket to the door and pull the mirror out, being careful not to damage the connectors that must be disconnected by opening the door and removing the protective panel.

To install the new mirror, follow the reverse procedure.


Posted on 20 May 2026 by ScegliAuto


Related tutorials

Replacement of the turn signal lights in the exterior rearview mirror of the Mercedes Class C.
Replacement of the turn signal lights in the exterior rearview mirror of the Mercedes Class C.
Mercedes Classe C (2000-2007 / W203) .. of the exterior rearview mirror of the Mercedes Class C. First, let's move to the side and gently detach the cover of the exterior rearview mirror by.. …
How do you replace the external rearview mirror of the Mercedes C-Class?
How do you replace the external rearview mirror of the Mercedes C-Class?
Mercedes Classe C (2014-2021 / W205) .. the external rearview mirror of the Mercedes C-Class by first removing the door panel: once the removal has taken place, it will be possible to proceed.. …
How to replace the turn signal bulb of the Mercedes C-Class mirror
How to replace the turn signal bulb of the Mercedes C-Class mirror
Mercedes Classe C (2000-2007 / W203) .. the exterior rearview mirror of the Mercedes C-Class. First, move to the side of the car and start by removing the mirror glass; then unscrew the fixing.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos