Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service and Maintenance Light on a Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Service warning light

Here are the instructions to reset the service and maintenance light on a Mercedes A-Class. First, get in the vehicle and turn on the ignition. Then, press and hold the "ok" button and the call button to enter the onboard computer menu, as shown in the video. Navigate to "assyst plus" and then to "full service," confirming and executing the reset of the maintenance light. Exit the settings and verify that the service light has been reset correctly!

Posted on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset the Tire Pressure Light on Mercedes A-Class
Reset the Tire Pressure Light on Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. to reset the tire pressure light on a Mercedes A-Class. First, take your vehicle to a tire shop to check the condition of the tires and their pressure... …
Reset the Tire Pressure Light on Mercedes A-Class
Reset the Tire Pressure Light on Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. reset the tire pressure light on the Mercedes A-Class; before resetting the TPMS sensors, it is necessary for all four tires to be at the operating pressure... …
How to Reset the Service Light on a Mercedes A-Class
How to Reset the Service Light on a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. light for routine maintenance on a Mercedes A-Class. First, get inside the vehicle and turn on the ignition; then press the menu button on the steering.. …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos