Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on the Mercedes A-Class.

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

Below we will see the instructions for resetting the maintenance light (service) of the Mercedes Classe A. First, we get into the car and start the instrument panel; then we go to the service menu by pressing the two buttons on the steering wheel, and then we record the maintenance kilometers, as shown in the video.

At this point, we exit the settings and the service menu and turn off the instrument panel, then turn on the engine; we verify that the service mileage counter and the maintenance key have been reset!


Posted on 17 August 2025 by ScegliAuto


Related tutorials

Resetting the Service and Maintenance Light on a Mercedes A-Class
Resetting the Service and Maintenance Light on a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. service and maintenance light on a Mercedes A-Class. First, get in the vehicle and turn on the ignition. Then, press and hold the "ok" button and the.. …
How to Reset the Service Light on the Mercedes A-Class
How to Reset the Service Light on the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) The Mercedes A-Class model W176 resets the service light following the same steps as the Mercedes CLS and GLA vehicles. The first step is to press th…
How to reset the service light on the 2018 Mercedes A-Class
How to reset the service light on the 2018 Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) Today we will show you how to reset the service light on a 2019 Mercedes A-Class vehicle. The first step is to press the Ok button to access the vehi…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos