Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in the Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Antifreeze coolant

See other generations:
Video tutorial

In this brief guide, you will find instructions to replace the engine coolant in the Mercedes C-Class. First, lift the vehicle and start unscrewing the coolant drain screw, allowing it to drain into a container for about ten minutes.

Then, bleed the entire system, removing the old fluid from the upper reservoir as well. At this point, top off with the new antifreeze of the correct type; fill until reaching the maximum level mark on the reservoir.


Posted on 20 July 2026 by ScegliAuto


Related tutorials

How to top up the coolant on the Mercedes C-Class
How to top up the coolant on the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. engine coolant (or antifreeze) on the Mercedes C-Class. First of all, we open the hood of the car and locate the coolant reservoir, located at the top.. …
How to Top Off the Coolant in the Mercedes-Benz C-Class
How to Top Off the Coolant in the Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. the coolant or antifreeze in the Mercedes-Benz C-Class. First, open the front hood and pull the lever located at the bottom to release the hood latch;.. …
How to Replace the Coolant in the Mercedes C-Class
How to Replace the Coolant in the Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. drain and refill the coolant in the Mercedes C-Class. First, lift the vehicle and start removing the plastic shield under the engine by unscrewing the.. …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos