Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Mercedes A-Class W168

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the service light on a Mercedes A-Class W168: turn on the instrument cluster and immediately press the trip odometer button twice (within 1 second). Turn off the ignition (key in position 0) and hold the trip odometer button.

While holding it, turn the key again to power on the cluster. Continue holding the button: after 10 seconds, the "service" message will appear with the remaining km and time, and you will hear a beep.

Release the button. Now you will see the new service interval set (e.g., 15,000 km or 365 days).

Turn off and turn on again to verify that the light is gone.


Posted on 6 September 2026 by ScegliAuto


Related tutorials

Mercedes Classe A (1997-2004 / W168) .. Today, we will see how to reset the service light on a Mercedes A-Class, model W168, produced from 1997 to 2004, thanks.. …
Mercedes Classe A (1997-2004 / W168) Let's see how to reset the service light on a first-generation Mercedes A-Class, produced from 1997 to 2004, through this brief video tutorial. First…
Mercedes Classe A (1997-2004 / W168) .. various fuses for the cabin of your Mercedes A-Class W168, then this guide is what you need. In fact, just read it carefully and follow the steps to.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Replacing the Glow Plugs on the Fiat Ducato 2.3 Multijet

Today, we will go through the main instructions to remove and replace the glow plugs on the Fiat Ducato 2.3 Multijet. First, open the bonnet of the vehicle and begin by removing the front bumper; to access the glow plugs, it will also be necessary to remove the cooling radiator and the intercooler by unscrewing the bracket bolts and disconnecting the various pipes. Now disconnect the connectors from the glow plugs and use a socket wrench with an extension to unscrew and remove them, replacing them with new original ones.

Watch the video!


by ScegliAuto

More videos