Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. CLA
    4. : How to replace the battery of a Mercedes Cla

Mercedes CLA - Video tutorial

Model: Mercedes CLA X117, C117 - Years 2013-2019
Part: Battery
Operation: How to replace the battery of a Mercedes Cla

How to replace the power supply battery of a Mercedes Cla? We open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard; we raise the front hood (by releasing the locking lever of the same with our fingers), then we put it in safety. Once the engine compartment is open: we will find the battery on the right; disassemble the locking pins of the battery terminals with a socket wrench, then, remove it from the engine compartment and replace it with a new one (same voltage). We close the bonnet at the end of its assembly. We test the battery.


Posted on 22 November 2023 by ScegliAuto



Replace the Mercedes Cla battery
Mercedes CLA (2013-2019 / X117, C117) Replace the battery of the Cla? Does the battery need to be changed? Let's see the disassembly of the old battery placed in the engine compartment. W
How do you replace the battery in the Mercedes CLA?
Mercedes CLA (2013-2019 / X117, C117) The replacement of the battery of the Mercedes CLA is done by opening the hood, so that access to the components inside the engine compartment can be
Guide to replacing the battery of the Mercedes CLA
Mercedes CLA (2013-2019 / X117, C117) Let's briefly see in this guide the steps that will allow us to disassemble and replace the battery of the Mercedes CLA. First, we open the hood and

Other guides that may interest you

    Frequently Asked Questions

    • Mercedes Cla 2013-2019 - Where is the battery located on Mercedes CLA? Read Answer
    • Mercedes Cla 2013-2019 - Where is the Mercedes CLA auxiliary battery located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos