Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : Rearview mirror replacement on a Mercedes Sprinter

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Outside rearview mirror
Operation: Rearview mirror replacement on a Mercedes Sprinter

The replacement of the side rear-view mirror on these vehicles is quite simple, however care must be taken because this is often done after they break, which can therefore be sharp, so it is always better to use protective gloves. In any case, it will be sufficient to tilt the upper and lower mirrors facing downwards, applying pressure with both fingers, so that by increasing the pressure surface, no breakage occurs. Once this is done, insert two fingers on each side into the space created and slowly but forcefully rotate the mirrors again downwards until they are detached from their housing.


Posted on 10 December 2023 by ScegliAuto



How to replace the exterior mirror on the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) The replacement of the exterior rearview mirror of the Mercedes Sprinter MK 2 is very easy to carry out and does not require disassembly of the mirro
How to remove the exterior mirror mirror on Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) Let's see how to remove the exterior mirror mirror on Mercedes Sprinter. With a lever (plastic or rubber coating), we go to pry between the perimeter
How do you replace the wing mirror on the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) In order to replace the exterior rear view mirror of the Mercedes Sprinter, the glass of the mirror must be tilted, so that it can be detached from i

    Frequently Asked Questions

    • Sprinter 2018-2030 - How do you remove the rear view mirror from the Mercedes Sprinter? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos