Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Tire Pressure Light on the Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tire pressure light on the Mercedes A-Class, first, turn on the ignition. Once this is done, press the button located at the top left on the upper left spoke of the steering wheel until the display shows the mileage.

At this point, press the down button until the display shows "Run Flat" and then press the small knob that pops out on the left side of the cluster, between the left gauge (odometer) and the oil level gauge. A prompt should appear on the display asking if you want to reset the "Run Flat indicator." Confirm by pressing the "+" button located on the upper right spoke of the steering wheel, and you're done!


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Reset Tire Pressure Light on Mercedes A-Class
Reset Tire Pressure Light on Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. to reset the tire pressure light on a Mercedes A-Class in simple steps. Before performing the operation, ensure that you have resolved any issues related.. …
Reset the Tire Pressure Light on Mercedes A-Class
Reset the Tire Pressure Light on Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. to reset the tire pressure light on a Mercedes A-Class. First, take your vehicle to a tire shop to check the condition of the tires and their pressure... …
Reset Tire Pressure Light on Mercedes A180
Reset Tire Pressure Light on Mercedes A180
Mercedes Classe A (2012-2018 / W176) In this video tutorial, you will learn how to reset the Tire Pressure Monitoring System (TPMS) light on a Mercedes A180, third generation. Before per…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos