Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Centre Console on a Mercedes SLK

Model: Mercedes Slk MK 2, R171 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Center console tunnel

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the centre console along with the radio from a Mercedes SLK, covering the main steps. First, get inside the vehicle and initially remove the rubber caps from the radio and unscrew the Torx screws underneath.

Remove the plastic cover under the gear lever (snap-fit) and unscrew the ring to remove the gear knob. Remove the mirror adjustment panel by prying it off and disconnect the electrical connectors.

Now, use a screwdriver to remove the pin from the ashtray. Continue watching the video for the complete removal of the console!


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Remove the Centre Dashboard Panel of a Mercedes SLK
How to Remove the Centre Dashboard Panel of a Mercedes SLK
Mercedes Slk (2004-2011 / MK 2, R171) Here’s how to remove the centre dashboard panel of a Mercedes SLK. Position the gear knob vertically, then use a plastic lever to pry off the trim (t…
Removing the Rear Door Panel of a Mercedes SLK
Removing the Rear Door Panel of a Mercedes SLK
Mercedes Slk (2011-2016 / R172, MK 3) Remove the door panel of a Mercedes SLK. Use a screwdriver to unscrew the screws located in the space of the upper door handle and the screws present…
Where are the Fuses Located in the Mercedes SLK?
Where are the Fuses Located in the Mercedes SLK?
Mercedes Slk (2004-2011 / MK 2, R171) The Mercedes SLK has three fuse boxes inside the car: the first is located on the left side of the dashboard, accessible only by opening the driver's…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos