Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Slk
    4. : Removal of the rear panel of a Mercedes Slk

Mercedes Slk - Video tutorial

Model: Mercedes Slk R172, MK 3 - Years 2011-2016
Part: Door panel
Operation: Removal of the rear panel of a Mercedes Slk

We perform the disassembly of the door panel of a Mercedes Slk. Using a screwdriver, unscrew the screws located in the space of the upper lever of the door opening and the screws present in the handle (after removing the plastic cover). Unscrew the remaining screws on the door panel and detach the clips for tightening it. Finally, remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We carry out the desired maintenance inside the door. We mount the panel above the door as we disassembled earlier.


Posted on 27 November 2023 by ScegliAuto



Replace LED headlights on Mercedes SLK
Mercedes Slk (1997-2004 / R170, MK 1) Replacing the headlights on a Mercedes SLK is pretty straightforward. We need to access the luggage compartment and remove the tool bag on the side o
How do you remove the Mercedes SLK instrument cluster?
Mercedes Slk (2011-2016 / R172, MK 3) In order to remove the instrument panel from the Mercedes SLK, you need to press the special button which allows you to pull the steering wheel back
How to replace the rear brake disc on a Mercedes SLK
Mercedes Slk (1997-2004 / R170, MK 1) Before starting, we will have to lift the rear side of our Mercedes SLK. So let's start by disassembling the rear wheel, unscrewing the relative fixi

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos