Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Slk
    4. : How to disassemble the door panel in the Mercedes SLK?

Mercedes Slk - Video tutorial

Model: Mercedes Slk R170, MK 1 - Years 1997-2004
Part: Door panel
Operation: How to disassemble the door panel in the Mercedes SLK?

In this tutorial we can see how to remove the door panel in the Mercedes SLK, an extremely simple and fast operation. First of all, open the door in question, then disengage the frame of the lock and unscrew the screw located on the upper area of the external edge. We then remove both the small cap indicated and the cover of the support handle, unscrew the additional screws just released and disengage the internal cover of the mirror. At this point we can pry along the entire perimeter of the panel and separate it from the door.


Posted on 6 December 2022 by ScegliAuto



Removal of the rear panel of a Mercedes Slk
Mercedes Slk (2011-2016 / R172, MK 3) We perform the disassembly of the door panel of a Mercedes Slk. Using a screwdriver, unscrew the screws located in the space of the upper lever of th
How we remove the door panel on Mercedes Slk Class convertible
Mercedes Slk (2004-2011 / MK 2, R171) How do we remove the door panel (driver's side) on Mercedes Classe Slk convertible? Let's see how to proceed together in this video. Before starting
How to remove the door panel on a Mercedes SLK R171
Mercedes Slk (2004-2011 / MK 2, R171) To remove the door panel on a Mercedes SLK R171, here are the general steps you can follow. Before starting, it is important to disconnect the negati

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos