Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on Mercedes C-Class

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the door panel from a Mercedes C300. First, open the door and unscrew the screws located under the switch panel using a Torx screwdriver, as shown in the video. At this point, pry on the sides to detach the panel.

Remove the triangular part of the speaker and pull out the door panel, being careful not to apply too much force to avoid breaking it. Then, disconnect the handle cable and the power connector for the window regulator located at the back to fully remove it.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Mercedes C-Class
How to Remove the Rear Door Panel of a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. can start, open the rear door of your Mercedes C-Class. Begin by unscrewing and removing all the screws that secure the rear door panel to the door itself... …
How to Remove the Rear Door Panel of a Mercedes C-Class?
How to Remove the Rear Door Panel of a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. you begin, open the rear door of your Mercedes C-Class. Start by unscrewing and removing all the screws securing the rear door panel. Once you have unscrewed.. …
How to Remove the Door Panel on Mercedes C-Class
How to Remove the Door Panel on Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. remove the left rear door panel on a Mercedes C-Class? Let's see how to proceed in this video. Before starting the disassembly, disconnect the battery.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos