Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : Mercedes A-Class car radio disassembly

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Car stereo
Operation: Mercedes A-Class car radio disassembly

Today we will see, in this video tutorial, how to disassemble the car radio of a Mercedes A-Class third series. First we go to remove the air vents that we find above the radio (to do this it will be enough to pry the sides with something sharp and pull) and we go to unscrew the screws that we find inside them with a torx screwdriver; then with a lever we go to extract the radio, very delicately and without damaging the other components. Once extracted we go to disconnect any electrical connectors that we find on the back of the car radio and that's it!


Posted on 28 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe A 2004-2012 - Why does the Mercedes A-Class car radio no longer turn on? Read Answer
    • Classe A 1997-2004 - Why does the display of the Mercedes A-Class w168 not work? Read Answer
    • Classe A 2018-2024 - Why does the car radio of the Mercedes A-Class not work? Read Answer
    • Classe A 1997-2004 - Where is the Mercedes A-Class car radio fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos