Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Mirror Glass on Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Side mirror

See other generations:
Video tutorial

Using a small flathead screwdriver or a plastic trim tool (not metal!), tilt the top part of the mirror glass, then detach the small metal clip. Continue to pry the glass with the flathead screwdriver until you can remove it by hand.

Before fully extracting it, disconnect the two wiring connectors for the mirror heating. Treat these connections with the appropriate spray.

At this point, connect the new glass you purchased. Finally, insert it back into the housing until all the clips snap into place.

Good luck!


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Replacing the Glass of the Mercedes E-Class Side Mirror
Replacing the Glass of the Mercedes E-Class Side Mirror
Mercedes Classe E (1995-2002 / W210) .. of the external side mirror on the Mercedes E-Class. First, move to the side and gently pry the glass away from the sides; disconnect the small electrical.. …
How to Replace the Left Side Mirror Glass on a Mercedes E-Class
How to Replace the Left Side Mirror Glass on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. do you replace the mirror glass on a Mercedes E-Class? Let's see how to proceed in this video. Use a plastic or rubber trim tool to pry between the edge.. …
Disassembly of the external rearview mirror of the Mercedes E-Class
Disassembly of the external rearview mirror of the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. the external rearview mirror of the Mercedes E-Class. First of all, let's move to the outside of the car and start disassembling and removing the plastic.. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos