Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Removal on Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuse box

See other generations:
Video tutorial

Let's see how to remove the fuses on a Mercedes E-Class. Lift the trunk lid and locate the access panel on the right side.

Remove the cover in the trunk, then take off the plastic cover for the fuses. Use needle-nose pliers to pull out the damaged fuses from the compartment.

Once this is done, insert the new fuses into their designated slots in the compartment. Close the fuse box inspection cover.

Test the proper functioning of the vehicle by turning on the instrument panel. Close the trunk lid after maintenance.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Schema and positioning of the fuses in the Mercedes E-Class.
Schema and positioning of the fuses in the Mercedes E-Class.
Mercedes Classe E (2016-2023 / W213) .. us to access the fuse boxes of the Mercedes E-Class, going to find the diagram and the chart. First, we open the car's engine hood and start removing.. …
Fuse Diagram and Location for the Mercedes E-Class
Fuse Diagram and Location for the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. and diagram of the fuses for the Mercedes E-Class. First, get inside the vehicle and start removing the panel located at the bottom left on the driver's.. …
How to Remove the Radiator Fan from a Mercedes E-Class
How to Remove the Radiator Fan from a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. you can start, open the hood of your Mercedes E-Class. First, unscrew and remove the bolts securing the radiator fan to the radiator. Then, disconnect.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos