Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Fog Light Bulbs on Mercedes C-Class W204

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fog lights

See other generations:
This video is currently unavailable

In this video, follow the instructions to remove and replace the front fog light bulbs on a Mercedes C-Class W204 in simple steps. First, gather a Torx screwdriver and remove the screws from the fog light housing grille.

Once the grille is removed, take out the fog light bulb from the housing as shown in the video. Next, disconnect it from the electrical connector and replace it with the correct new bulb.

Finally, reconnect it and insert it back into the housing, reassembling everything as shown in the video until the end!


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs in a Mercedes C-Class?
How to Replace the Headlight Bulbs in a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) Replacing the headlight bulbs in a Mercedes C-Class, as shown in this tutorial, is an extremely simple and quick task. First, ensure the key is not i…
Where are the fuses located in the Mercedes C-Class?
Where are the fuses located in the Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) Each of the fuses of the Mercedes C-Class is present in the appropriate fuse boxes that are installed on the car: in this type of vehicle, you can fi…
How to Replace the Front Turn Signal Bulbs in the Mercedes-Benz C-Class?
How to Replace the Front Turn Signal Bulbs in the Mercedes-Benz C-Class?
Mercedes Classe C (2007-2013 / W204) .. front turn signal bulbs in the Mercedes-Benz C-Class W204 is a very simple task. First, lift the car with a jack in the area where you will be working,.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos