Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the front indicator bulbs in the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Light bulb
Operation: How to replace the front indicator bulbs in the Mercedes C-Class?

Replacing the front turn signal bulbs in the Mercedes C-Class W204 is a very simple operation, let's see how to proceed in this tutorial. As we can see, we must first lift the car with a jack in the area where we are going to operate, and then remove the wheel, this will allow us to access the rear of the headlight. Once this is done, remove the front part of the wheel arch by releasing the 3 clips indicated. At this point, with a Torx screwdriver with T20 tip, unscrew the two screws of the rear cap, extract the bulb with pliers and insert the spare. Finally, we reassemble everything by following the reverse procedure.


Posted on 16 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - What does the wording "Light Error" on the Mercedes W204 indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos