Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Mirror on Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side mirror

See other generations:
Video tutorial

How to remove the mirror on the Mercedes A-Class? Let's see how to disassemble the mirror and the cover cap. Pry between the perimeter of the mirror frame and the mirror glass. Pry until the plastics detach from the mirror (disconnect the power cable).

Release the plastics of the cap until you remove it from above the mirror (if you want to replace it). Replace the damaged part with the new one. Be careful to engage the plastic clips into the mirror supports during installation.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Remove the Exterior Rearview Mirror of the Mercedes A-Class W176
How to Remove the Exterior Rearview Mirror of the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. the exterior rearview mirror of the Mercedes A-Class W176, third series. First, open the front door and start by removing the door panel on the side.. …
How to Remove the Side Mirror on a Mercedes A-Class
How to Remove the Side Mirror on a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. how to remove the side mirror on a Mercedes A-Class. Use a plastic or rubber trim tool to pry between the edge of the mirror housing and the mirror.. …
Replacing the Glass of the Exterior Rearview Mirror on the Mercedes A-Class
Replacing the Glass of the Exterior Rearview Mirror on the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. the exterior rearview mirror on the Mercedes A-Class. First, approach the rearview mirror and start by disengaging the mirror glass from the rear support,.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos