Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Speedometer Lights on Mercedes E-Class

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Instrument panel light

See other generations:
Video tutorial

The instrument cluster on the Mercedes E-Class W210 is simply clipped into its designated slot, so no special procedures are needed to remove it. Just insert one or two small flathead screwdrivers (or two plastic levers) into the surrounding gaps and pry it out to release the cluster from its location.

Once the cluster is removed, disconnect the two connectors: to do this, press the locking tab and pull the connector while twisting it. At this point, you are almost done: now that you have the speedometer completely disassembled, you can access the bulbs from the back.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Remove the Interior Light Fixture on a Mercedes E-Class W211
How to Remove the Interior Light Fixture on a Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. the interior light fixture on a Mercedes Benz E-Class W211, fourth generation. First, get inside the car and use a thin tool to pry off the various plastic.. …
How to Remove the Front Door Panel of the Mercedes E-Class
How to Remove the Front Door Panel of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. to remove the front door panel of the Mercedes E-Class. First, open the front door of the vehicle and start by removing the plastic cover located under.. …
How to replace the rear light of the Mercedes Class E
How to replace the rear light of the Mercedes Class E
Mercedes Classe E (2009-2016 / W212) .. and replace the rear light of the Mercedes E-Class. First, let's open the rear trunk lid and start removing the side trim of the luggage compartment.. …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos