Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Light Fixture on a Mercedes E-Class W211

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Interior dome light bulb

In this video tutorial, you will learn how to remove the interior light fixture on a Mercedes Benz E-Class W211, fourth generation. First, get inside the car and use a thin tool to pry off the various plastic covers; then disconnect the rearview mirror and gently pull down the light fixture. At this point, disconnect any wires to replace it; you can also replace the bulbs in the fixture. Apply the reverse procedure for reassembly, following the video to the end!

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Turn Signal Switch Replacement on Mercedes E-Class 320 W211
Turn Signal Switch Replacement on Mercedes E-Class 320 W211
Mercedes Classe E (2002-2009 / W211) In this short video tutorial, we will see instructions on how to remove the turn signal switch from a Mercedes E-Class 320 W211, third series. First,…
Where is the OBD2 port located on the Mercedes E-Class W211?
Where is the OBD2 port located on the Mercedes E-Class W211?
Mercedes Classe E (2002-2009 / W211) .. locate the OBD2 port inside your Mercedes E-Class W211, just read the following guide carefully and follow the steps described. Once inside the vehicle,.. …
How to replace the front headlight bulb of the Mercedes E-Class W211
How to replace the front headlight bulb of the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. the front turn signal bulb of your Mercedes E-Class W211 is really simple and to complete the operation correctly, you just need to follow the procedure.. …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos