Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Dome Light on Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Interior dome light bulb

See other generations:
Video tutorial

Remove the dome light from the Mercedes E-Class? Let's see how to take it off from inside the panel. Remove the trim plastic under the dome light (above the rearview mirror).

Use a screwdriver to pry between the dome light and the headliner panel, pull the dome light out from the panel, and disconnect the power connector. Replace the damaged bulbs in the dome light with new ones (same size and voltage).

Reinstall the dome light in its housing (push the clear plastic with your hands until the tabs lock into the side plastic). Install the cover plastic and finally test the operation.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to Remove the Dome Light on the Mercedes E-Class
How to Remove the Dome Light on the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. dome light panel on the roof of the Mercedes E-Class, locate the dome light positioned on the roof near the center console. Remove the two small opaque.. …
How to Remove the Interior Light Fixture on a Mercedes E-Class W211
How to Remove the Interior Light Fixture on a Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. the interior light fixture on a Mercedes Benz E-Class W211, fourth generation. First, get inside the car and use a thin tool to pry off the various plastic.. …
How to Replace the Headlight Bulb on a Mercedes E-Class
How to Replace the Headlight Bulb on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. Replacing the headlight bulb on a Mercedes E-Class is a simple and quick task you can do yourself. To replace the bulb, remove the cover of the light.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos