Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dome Light on the Mercedes E-Class

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Instrument panel light

See other generations:
Video tutorial

To remove the dome light panel on the roof of the Mercedes E-Class, locate the dome light positioned on the roof near the center console. Remove the two small opaque plastic light covers using a flat tool.

Then, using the same tool, pry on the rear side of the dome light (the side farthest from the windshield) to release the retention clip. At this point, carefully disconnect the wiring and the corresponding electrical connectors located on the back of the dome light.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seat Bench of a Mercedes E-Class
How to Remove the Rear Seat Bench of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. start, open the rear doors of your Mercedes E-Class. Begin by prying off and removing the rear cup holder cover, then detach it by unscrewing the mounting.. …
How to Remove and Clean the EGR Valve on the Mercedes E-Class
How to Remove and Clean the EGR Valve on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. remove and clean the EGR valve on the Mercedes E-Class, following the instructions below. First, open the hood and start by removing the upper plastic.. …
Guide to Disassembling the Cylinder Head and Gasket of the Mercedes E-Class
Guide to Disassembling the Cylinder Head and Gasket of the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. cylinder head and its gasket on the Mercedes E-Class. First, open the hood and start by removing the cylinder head cover, loosening the spark plugs.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos