|
Do it yourself
| |||
| ||||
DIY Windshield Replacement
Model: Mercedes Classe E
W212
- Years:
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
Replacing the windshield is a delicate and dangerous operation. To prevent accidental breakage of the glass during removal, it is advisable to protect the interior of the vehicle with coverings to avoid glass shards spreading, including entering the ventilation system. Also, use appropriate protections for your hands and eyes. Start by lowering the front windows, then use a sturdy plastic tool to remove the seal and trim around the glass. Open the hood and remove the wiper mechanism to take it out. Unscrew the retaining screws of the air intake grille and remove it, also disconnecting the fan motor connector. Remove the protective cover of the camera located behind the rearview mirror by disconnecting all connectors. Remove the covers of the two pillars by acting on the hidden screws behind the plastic caps. Also, protect the engine air intakes and proceed to lift the windshield to remove it. It is advisable to perform this operation with proper suction cups. With a tool, carefully clean the edge of any residue from the old seal. Apply silicone sealant to the edge of the new glass that you will position on the vehicle using the suction cups. Place the appropriate spacers along the edge of the glass to position it correctly. Complete the sealing. Reinstall the camera and finish with the trim.
Updated on 3 February 2026 by ScegliAuto
Related tutorials
Mercedes Classe E
(1995-2002 /
W210)
It is recommended to perform this repair only if you have good mechanical knowledge and, above all, a lot of patience.
Damage to the heater core (i.e…
Mercedes Classe E
(1984-1995 /
W124)
How do you perform maintenance on your Mercedes E-Class? Let's see how to replace the cabin air filter. Open the hood; remove the plastic cover under…
Mercedes Classe E
(1995-2002 /
W210)
The cabin air filter is located just under the windshield, at the wiper arm connection: to access it, open the hood, remove the rubber covers and sea…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |