Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Mercedes E-Class

Model: Mercedes Classe E W124 - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Cabin air filter

See other generations:
Video tutorial

How do you perform maintenance on your Mercedes E-Class? Let's see how to replace the cabin air filter. Open the hood; remove the plastic cover under the windshield with a lever.

Use a screwdriver to unscrew the filter cover (where the air filter is located). Remove the cap from the filter housing with a screwdriver, then pull out the worn cabin air filter.

Insert a new cabin air filter, ensuring it fits snugly against the walls of the housing. Reinstall the filter housing cover and tighten the screws.

Reattach all the plastic pieces under the windshield. Check that all parts are properly installed.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Mercedes E-Class
How to Replace the Cabin Air Filter on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. In this video tutorial, we can see how to replace the cabin air filter on a Mercedes E-Class by following a few simple steps: the first.. …
How to Replace the Cabin Air Filter on the Mercedes E-Class
How to Replace the Cabin Air Filter on the Mercedes E-Class
Mercedes Classe E (1984-1995 / W124) .. replace the cabin air filter on the Mercedes E-Class in simple steps. First, open the hood and start removing the plastic seal located under the windshield;.. …
Replacing the Cabin Air Filter in a Mercedes E-Class W124
Replacing the Cabin Air Filter in a Mercedes E-Class W124
Mercedes Classe E (1984-1995 / W124) First, purchase a new cabin air filter from an authorized auto parts dealer. The cabin air filter is located at the top of the engine compartment und…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos