Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery on Mercedes C-Class W205

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

In this video, you will see how to remove and replace the engine battery on a Mercedes Benz C-Class W205 in simple steps. First, open the hood of your car and remove the left side engine cover; then remove the air filter box to access the battery located underneath.

At this point, disconnect the two terminals (positive and negative) using a ratchet wrench, and unscrew the bolt of the battery mounting bracket found at the bottom with a torx wrench; all that's left is to remove the battery by disconnecting the side cable and replace it with the new one!


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) .. the cabin air filter in your Mercedes-Benz C-Class W205 (2014-2021), follow the steps below. First, completely turn off your Mercedes-Benz C-Class.. …
Mercedes Classe C (2014-2021 / W205) .. You can find the battery of the Mercedes C-Class W205 in the upper left corner of the engine compartment. After lifting the hood, remove the grille.. …
Mercedes Classe C (2014-2021 / W205) .. discover where the OBD2 port of your Mercedes C-Class W205 is located, then all you have to do is read the following guide carefully and follow all the.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the auxiliary battery of a Mercedes C-Class located? Read answer
    • Classe C 2000-2007 - Where is the secondary battery of the Mercedes Benz W203 located? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos